PTP Machining CentersModel: T-E4

T-E4 Double Rank Drill PTP Five-Sided Centre

Name: T-E4 Double Rank Drill PTP Five-Sided Centre
Brand: Tuodiao CNC

T-E4 PTP five-sided machining centre with double-row vertical rank drill packs, horizontal drills and an ATC milling spindle - five faces machined in one clamping for dense hole patterns.

Key Features

Double-row vertical packs machine more holes per locating step, speeding dense panels

Horizontal drill sets finish the four side faces - five faces in one setup

Milling spindle takes slots, pockets and contours without splitting the process

Inline magazine cycles drill bits, cutters and saw tools in sequence

Zoned vacuum table with pneumatic clamping holds panels without drift

AC servo drives keep hole positions identical through long runs

Technical Specifications

Configuration	Double rank drill PTP five-sided drilling and milling centre
Working Area	approx. 2800 × 1300 mm
Vertical Drills	Double-row rank drill packs covering standard cabinet hardware
Horizontal Drills	X / Y horizontal drill sets for side face holes
Spindle Power	9.5 kW
Tool Magazine	Inline automatic tool change, approx. 8-12 tools
Table	Zoned vacuum table
Power / Total Load	380V 50Hz / approx. 25 kW

Applications

Wardrobe and cabinet side, top and bottom panels with dense hole patternsComposite panels needing drilling and milling togetherFactories merging nesting and rank drilling into one machineFlexible lines paired with edge banders and six-sided drills

Overview

The T-E4 is a PTP five-sided machining centre built around double-row vertical rank drill packs. Compared with single-row machines it reaches more diameters and positions from one locating step, which pays off on hole-dense wardrobe sides, shelves and top or bottom panels. With the horizontal drill sets and milling spindle, the top face and all four side faces are completed in a single clamping.

Structure and Process

A zoned vacuum table with pneumatic clamping bar secures the panel. The 9.5 kW spindle runs to 24000 rpm and the inline magazine auto-changes between drill bits, routers and cutting tools. Working area of roughly 2800 × 1300 mm matches standard panel furniture sizes, and programs are driven straight from cutting-list and CAM data.

Who It Is For

Suited to factories with complex, hole-rich products and to customers upgrading from separate nesting and rank drilling machines, since combining both steps shortens handling and removes repeat-locating error.

Note: Some values shown are typical for this series and will be confirmed with the factory before final quotation.

Request a Quote

Tell us about your requirements and we'll get back to you within 24 hours.

Need Help Choosing?

Our engineers can help you select the right machine for your production needs.

Chat on WhatsApp